Posts by DanGr

The ULTRA-X20 is the new compact point source loudspeaker from Meyer. It’s based around two 5” cone drivers, one 2” diaphragm compression driver and a rotatable 110° x 50° horn in a coaxial configuration. Power comes from a three-channel Class D amplifier managed with on board DSP. Specified with operating frequency range of 60 Hz…

USW-112P is a compact subwoofer housing a single 12” long-excursion driver and using a class D amplifier with DSP control. The cabinet design features a low velocity port, based on the USW-210P, tuned for linear response and low distortion. Preliminary performance specifications include a linear peak output (measured with M-Noise signal) of 123 dB SPL…

Epson’s EB-L1060UNL is part of their most compact interchangeable-lens laser projector series. It uses 3-chip 3LCD technology and sports a native WUXGA resolution with 4K Enhancement Technology, a high contrast ratio and BT.709 colour space. With up to 7,000 lumens of both colour and white brightness, the laser light source helps keep maintenance low for…

LA2Xi is an install-specific amplified controller from L-Acoustics. Its bridgeable 4 x 4 channels can be configured with one, two, three or four outputs. This allows it to drive small, medium and large format loudspeakers, in full or reduced SPL, for various types of applications. Bridged all together (4×1) and it outputs 2550W. Housed in…

Martin ERA has released the 800 LED moving head profile. With crisp optics, full curtain framing and matched colour mixing and gobos from the MAC range, the 800W white LED engine produces a bright, sharp 6,500K gobo projection with a flat field. It features 1:8 of zoom (7 to 56 degrees), electronic dimming and strobe,…

Dynacord’s Sonicue offers a new way of working with OCA (AES70) controlled sound systems (TGX-, IPX- and RCM28 equipped amplifiers). It allows system engineers to streamline the control and configuration of their OCA (AES70) enabled loudspeaker system. The software allows direct access to every system parameter on the fly, for fast set-up and tuning. Designed…

The WS-12 is a 1000 Watt, 12-inch subwoofer ready for both studio and live work. Can be used in the studio as a companion subwoofer to Kali’s Lone Pine and Independence monitors, on the road with sturdy construction or for use in surround mixing applications. +/- 3 dB lower frequency range at 30 Hz, with…

Symetrix have added the WX Wall Controllers to their range. With a user programmable OLED display and dedicated knobs and buttons, standard IP communication over Ethernet also uses PoE. Available in three configurations, the controls of the WX series may be used for source selection, volume, mute, and preset recalls for any Composer based Symetrix…

The A164D Wall LCD is a 16 input 4 output I/O Expander using Dante, designed to provide fixed, additional I/O anywhere on a network. It has 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at…

QSC’s AD-P.HALO is an integrated SUB/SAT pendant loudspeaker system featuring an integrated 6.5” subwoofer and four 2.75” transducers in a single enclosure. It’s ready to install right out the box and 200 watts RMS capable. The Halo are designed to integrate aesthetically with QSC’s other AcousticDesign Series loudspeakers (ceiling-mount, pendant-mount and surface-mount) and sonically with…

TesiraCONNECT TC-5D bridges AVB and Dante networks in AV solutions. TC-5D is designed to support a range of applications, from a Dante enterprise backbone to bridging multiple Biamp conference rooms, or solutions combining Biamp Tesira products with common Dante devices. It comes with five network connections, four of which are PoE+-powered RJ-45 ports that support…

Biamp’s Community LVH-900 large-format, arrayable point source loudspeaker is engineered to serve as a primary loudspeaker for arenas, theatres, stadiums, houses of worship, and other large venues. Its beamforming capabilities allow system designers to modify the coverage pattern of a single loudspeaker, or array of loudspeakers, without having to change out the physical box. Each…