News
15 Dec 2017
SIA’s Nostalgic for the Present tour
Subscribe to CX E-News
SIA’s Nostalgic for the Present tour delivered three stadium shows: Sydney, Melbourne and Auckland.
FOH engineer Jon Lemon has known SIA for most of her life and has been doing gigs for her on and off since 2002. When he wasn’t out on tour with the big name acts he works for, he would do the clubs and small theatres with her. Today SIA is an international music star and Jon is still there at FOH, albeit mixing in a stadium rather than a club.
“It’s a very organized show,” said Jon. “The biggest challenge was putting it all together in the first place as it’s mostly playback in terms of the music. The brief I had was to make it feel like it was live but also sound like the record with SIA then singing live on top of it.
“I see it a lot with hip hop and rap where it’s just the artist and a DJ with minimum amount of stems and the engineer has just got nowhere to go and nuance it like the record. The environment changes the audio all the time, it might be a gig sucking out all the percussive stuff or over emphasizing the bass and you need control over all of those things.”
A DiGiCo guy through and through, Jon was using an SD5 with a couple of Waves Servers on it plus a little bit of outboard; Waves MaxxBass, a few Maag EQ4’s and Smart C2 compressors to keep it all in control and even the sound out.
“SIA has a big voice so I use Waves Renaissance compressors as well as their 1176 limiters on her vocals as she is so dynamic,” said Jon. “It’s pretty dialed in and quite simple because we did a lot of the work beforehand, in this modern way of doing things.”
Jon has around fifty inputs on his DiGiCo SD5, all split up and presented like it’s a live band playing – with more consistency than usual and less egos!
“A lot of people may think it’s complicated but I don’t because I have been so close to the music and the process of it,” elaborated Jon. “I know how she sings and I know how to ride it around to keep it level. As everything is so consistent we have a pretty good result most of the time. A lot of modern music is about the system engineer and how the company sets up the system. When I first started out, I was doing it all but realized a few years back that the complexities of these big venues, with networking, delays, and timing, is best left to someone else so I can concentrate on the art part of it. Of course, I oversee it all and will walk the room …. but on this tour I have one of the best L-Acoustics system engineer and designers in the business which makes my life easier.”
That system tech is Vic Wagner who, alongside JPJ Audio’s Mats Frankle, ensured the L-Acoustics K1 / K2 PA was tuned, timed and ready for action. Multiple delay towers and rings were required to cover the stadium as much as possible, delivering maximum SPL possible without upsetting the EPA people.
Jon reports that he had complete faith in his support team of Mats Frankle, JPJ Audio’s Bob Daniels and Vic Wagner commenting that the entire JPJ crew impressed him.
“The L-Acoustics K1 is a really reliable PA and sounds great,” added Jon. “We had two main hangs, subs across the front, sides a mixture of K1 and K2 and then four K2 delay towers. It all worked perfectly.”
SIA has always used a trusty Shure SM58 microphone and according to Jon, she always will.
“I’d like to change it but she is so used to using the SM58 dynamically its part of the way she sings,” he explained. “That’s why I use the Maag EQ4’s as analogue inserts because they have the airband on them which means you can actually make an SM58 sound like an expensive microphone!”
Jon remarked that he had a great JPJ crew on the tour and, seeing as he worked for JPJ many moons ago and he knows so many staff, he sees working with JPJ as a family event …..in fact he wouldn’t even consider using anyone else in Australia.
Jon will be touring Australia with Roger Waters early next year and again he will reunite with JPJ Audio.
Subscribe
Published monthly since 1991, our famous AV industry magazine is free for download or pay for print. Subscribers also receive CX News, our free weekly email with the latest industry news and jobs.